2003-2004 Mustang Cobra JLT 12" High Boost Cold Air Intake (Painted)

We are excited to bring you the all new JLT 12" High Boost Cold Air Intake for the 2003-2004 Mustang SVT Cobra.

Be sure to check out the videos above for amazing footage of the installation, testing, and use of this cold air intake.

NEW TUBE DESIGN - Using the original JLT CAI as a guide, JLT molded, sculpted and perfected everything until we had the best looking, fitting, and performing system you can buy. The new JLT tube has a 4-1/4" internal diameter and is roto-molded ABS plastic to resist engine heat and keep the intake air charge nice and cool. NO METAL TUBING HERE!! Like all JLT parts, this cold air intake is MADE IN THE USA!

Our massive 4.5" x 12" S&B Powerstack Air Filter is moved into the fender well for a cooler intake charge and can support 800-900 RWHP. Uses the factory "S" style PCV hose.

MOLDED-IN MAF - Using the supplied MAF gasket and screws, install your SCT electronics into the JLT tube and you now have a 105mm MAF incorporated right into the tube. No couplers, reducers, or smaller MAF housing to disrupt airflow. Now you have a perfectly smooth, huge 4-1/4" ID tube rushing cool air to the throttle body. Custom Tuning Required

The following products and services are REQUIRED for the proper use and installation of this cold air intake:

• SCT BA2600 or SCT BA3000 Mass Air Flow Sensor (will not work with OEM MAF, SCT 2400, or 2800 MAF)
• Custom PCM Tune (Click Herefor more information about our Loyalty Tunes Program)

FINISH OPTIONS - This JLT cold air intake kit is available in your exact body color. All painted tubes go through an in-depth process to remove all the texture, then we use only the best quality materials to give each tube a smooth gloss finish. Let us know what paint color you have by choosing from the drop-down menu above. This kit is also available in a Textured Black Plastic and the unique Mystichrome Version. All versions are heat resistant plastic, versus metal, which can get hot and have the reverse effect.

FITMENT - 2003-2004 Cobras w/ OEM, Whipple, or Kenne Bell Supercharger 1996-2004 GT 4.6 w/ Kenne Bell 2.6 or 2.8 Supercharger w/ Cobra Style Throttle Body

EASY INSTALL - The new design and detailed instructions helps make this an easy install.

NOTE: Throttle body locations are different depending on whether you have an OEM Supercharger, Kenne Bell Supercharger, Whipple Supercharger, Whipple Crusher Inlet, K-Member and / or aftermarket motor mounts. Due to these variances, minor modifications may need to be made for best fit, like moving I/C pump, bracket, hoses, etc.

KIT INCLUDES:

• JLT Textured Plastic Intake Tube
• Silicone Coupler
• Apron Plate
• 4.5" x 12" S&B Pre-oiled Powerstack Air Filter
• JLT MAF Gasket
• HD Clamps & All Necessary Hardware

This is a pre-painted part, PLEASE make sure you order the correct color from the Finish Options drop-down menu above and avoid a potential restocking fee. For help with choosing the correct paint color, see our Mustang Paint Codes help page.

NOTE: If you're vehicle's paint color is Laser Red (E9), JLT will substitute Redfire (G2), as these pigments are virtually identical. See photo above for comparison.

NOTE: Will not fit with most strut tower braces.